| Product
Name: |
SCT6017 |
|
| Application: |
Cooling
Water Treatment |
| Brief
Description: |
Scale
& Corrosion Inhibitor - White Rust Passivation |
| Format: |
Baton
(0.36kg) - Solid |
| Description |
SCT6017 is a solid cooling water treatment product
developed to protect galvanised cooling towers from
white rust conditions. SCT6017 is suitable for use
in both new installations and systems that must
be routinely passivated. It uses the very latest
anti-scaling and corrosion inhibition technologies.
Its corrosion inhibitors combine with conventional
chemistry to provide system protection via passivation.
SCT6017 comprises a small (0.36kg) solid chemical
baton wrapped in a water soluble bag. It is designed
to treat open cooling tower water systems during
system start-up, and helps to achieve a suitable
inhibitor concentration during this stage.
SCT6017 is also a good “catch up” solution
for cooling systems that have lost water or where
the inhibitor feed has been absent for some time.
It is also good for use in small cooling systems
where metering of the inhibitor into the system
is not practical.
SCT6017 contains ortho phosphate, polymer dispersant
and triazole.
Product Application / Feedrate
At a dosage rate of 250 ppm the parameters identified
in the table below should be met during the passivation
period. Operators should also refer to the tower
manufacturers guidelines for additional detail.
Water
Quality Range |
Dosage* |
Test
Range |
pH |
Calcium |
Alkalinity |
Chemical level in recirculating
water |
Ortho PO4 |
6.5 - 8.0 |
100 - 300ppm |
100 - 300ppm |
250 ppm |
100 ppm |
Each baton of SCT6017 yields 250 ppm of product
when added to 1.89m3 of system volume/water.
Testing & Control
Ortho phosphate test kits suitable for monitoring
and controlling the use of SCT6017 are available
from SCT.
Feeding *
When dosed into a cooling system, operators should
attempt to find a high flow area in the sump of
the cooling tower or inside an accessible make-up
tank. Please note that product dissolution rates
will vary depending upon water composition, temperature
and flow rate.
Packaging, Storage and Handling
SCT6017 is packaged in cases containing 30 x 0.36kg
water-soluble bags, each bag being enclosed in a
sealed cardboard tube.
Each case weighs 10.9kg.
For all safety data refer to the latest SCT MSDS.
Store this product in cool, dry area. Correctly
stored product will remain effective for between
24 to 36 months.
Additional Information
& Technical Support
For additional product information, application advice,
pricing or technical
support please contact us for further assistance.
|
