| Product
Name: |
SCT6015 |
|
| Application: |
Cooling
Water Treatment |
| Brief
Description: |
Non-Phosphorous
Scale & Corrosion Inhibitor |
| Format: |
Bottle
(4.5kg) - Solid |
| Description |
SCT6015 is solid water treatment product developed
for cooling systems where phosphate containing effluent
is a concern. It uses the very latest dispersant
and corrosion inhibition technologies combined with
conventional chemistry to provide system protection
at low product feed rates
SCT6015 is available in fully recyclable plastic
bottles each containing 4.5kg of concentrated solid
chemical.
SCT6015 contains Versaflex One, Triazole and ALCO
540 high performance polymer. SCT6015 contains no
phosphorous.
Product Application / Feedrate
SCT6015 can be used in cooling tower water systems
with an LSI Stability Indexes up to 3.0. For additional
application and monitoring data refer to the following
table:
Water
Quality |
Dosage* |
Test
Range |
| LSI Stability
Index |
Chemical level
in recirculating water |
T/T |
| 2.0 – 3.0 |
40 ppm |
6.4 ppm |
| 1.0 - 2.0 |
25 ppm |
4.0 ppm |
| < 1.0 |
Not recommended |
- |
* At a dosage rate of 25 ppm, 1 case of SCT6015
is equivalent to approximately 216kg of a conventional
liquid product. Comparative values will vary, dependent
upon concentration.
Testing & Control
Triazole specific test kits suitable for monitoring
and controlling the use of SCT6015 are available
from SCT.
Feeding
Feed SCT6015 using an SCT DB100 board system.
Packaging, Storage and Handling
SCT6015 is packaged in cases containing 4 x 4.5kg
bottles.
Each case weighs 18.2kg.
For all safety data refer to the latest SCT MSDS.
Store this product in cool, dry area. Correctly
stored product will remain effective for between
24 to 36 months.
Additional Information
& Technical Support
For additional product information, application advice,
pricing or technical
support please contact us for further assistance.
|
