| Product
Name: |
SCT6004 |
|
| Application: |
Cooling
Water Treatment |
| Brief
Description: |
Scale
& Corrosion Inhibitor Cooling Water Treatment |
| Format: |
Baton
(0.36kg) - Solid |
| Description |
SCT6004 is a highly effective open cooling water
treatment product in a concentrated solid baton
form that uses the very latest anti-scaling, anti-fouling
and corrosion inhibition technologies. SCT6004 scale
dispersant and corrosion inhibitors work with conventional
chemistry to provide system protection at low product
dosage rates.
SCT6004 comprises a small (0.36Kg) solid chemical
baton wrapped in a water soluble bag. It is designed
to treat open cooling tower water systems during
system start-up, and helps to achieve a suitable
inhibitor concentration during this stage.
SCT6004 is also a good “catch up” solution
for cooling systems that have lost water or where
the inhibitor feed has been absent for some time.
It is also good for use in small cooling systems
where metering of the inhibitor into the system
is not practical.
SCT6004 contains PBTC phosphonate, HEDP phosphonate,
versa-flex one, Ter-polymer, triazole and molybdate
tracer.
Product Application / Feedrate
SCT6004 can be used in cooling tower water systems
using the following dosage rates. The application
rates provided below are based on set water stability
indices, however in practice, dosage rates should
be set to suit individual water conditions.
Recommended Dosages
Water
Quality Range |
Dosage* |
Test
Range |
Ryzner Stability
Index |
Calcium |
Alkalinity |
Chemical level in recirculating
water |
Organo-
phosphonate |
Molybdate
(As Mo)
|
6.0 - 4.0 |
200 - 500ppm |
200 - 500ppm |
10 - 25ppm |
2 - 5ppm |
0.75 - 2.0ppm |
4.0 - 3.0 |
500 - 800ppm |
500 - 600ppm |
20 - 40ppm |
4 - 8ppm |
1.5 - 3.0ppm |
< 3.0 |
800+ppm |
600+ppm |
40+ppm |
8ppm |
4ppm |
* Each baton of SCT6004 yields 25 ppm of product
when added to 14.4m3 of system volume/water.
Testing & Control
Molybdate (as Mo) test kits suitable for monitoring
and controlling the use of SCT6004 are available
from SCT. SCTtest kits for Organo-phosphonate can
also be used.
Feeding*
When dosed into a cooling system, operators should
attempt to find a high flow area in the sump of
the cooling tower or inside an accessible make-up
tank. Please note that product dissolution rates
will vary depending upon water composition, temperature
and flow rate.
Packaging, Storage and Handling
SCT6004 is packaged in cases containing 30 x 0.36kg
water-soluble bags, each bag being enclosed in a
sealed cardboard tube.
Each case weighs 10.9kg.
For all safety data refer to the latest SCT MSDS.
Store this product in cool, dry area. Correctly
stored product will remain effective for between
24 to 36 months.
Additional Information
& Technical Support
For additional product information, application advice,
pricing or technical
support please contact us for further assistance.
|
