| Product
Name: |
SCT6012 |
|
| Application: |
Cooling
Water Treatment |
| Brief
Description: |
Scale
& Corrosion Inhibitor |
| Format: |
Baton
(0.36kg) - Solid |
| Description |
SCT6012 is a cooling water treatment scale and
corrosion inhibitor developed for “corrosive”
water conditions. Based on stabilised phosphate
it uses the very latest anti-fouling and corrosion
inhibition technologies.
SCT6012 comprises a small solid chemical baton
(0.36kg) wrapped in a water soluble bag. It is designed
to treat cooling water systems during system start-up,
and helps to achieve a suitable inhibitor concentration
during this stage.
SCT6012 is also a good “catch up” solution
for cooling systems that have lost water or where
the inhibitor feed has been absent for some time.
It is also good for use in small cooling systems
where metering of the inhibitor into the system
is not practical.
SCT6012 contains SHMP poly-phos, PBTC phosphonate,
DSP, ALCO 540 high performance polymer and triazole.
SCT6012 does not contain molybdate or heavy metals
such as zinc.
Product Application / Feedrate
At a dosage of 50 ppm in the re-circulating water,
this product formulation contains the following:
SHMP poly-phos - 7 ppm
PBTC phosphonate - 4 ppm
DSP - 4 ppm
ALCO 540 (active) - 11 ppm
T-T - 3.5 ppm
This formulation is designed for corrosive water
conditions which may or may not be scaling in nature.
For more aggressive corrosive conditions, i.e. <
0 LSI, feed rates above 50 ppm may be required.
Recommended Dosage Rates
The initial recommended dosage rate for SCT6012
is 50 ppm in the re-circulating water. However,
in practice, rates should be set to suit individual
water conditions.
Testing & Control
Phosphonate or polymer test kits suitable for monitoring
and controlling the use of SCT6012 are available
from SCT. Maintain ortho-PO4 at 8 ppm,
and active polymer at 11 ppm.
Feeding
When dosed into a cooling system, operators should
attempt to find a high flow area in the sump of
the cooling tower or inside an accessible make-up
tank. Please note that product dissolution rates
will vary depending upon water composition, temperature
and flow rate.
Packaging, Storage and Handling
SCT6012 is packaged in cases containing 30 x 0.36kg
water-soluble bags, each bag being enclosed in a
sealed cardboard tube.
Each case weighs 10.9kg.
For all safety data refer to the latest SCT MSDS.
Store this product in cool, dry area. Correctly
stored product will remain effective for between
24 to 36 months.
Additional Information
& Technical Support
For additional product information, application advice,
pricing or technical
support please contact us for further assistance.
|
