| Product
Name: |
SCT6011 |
|
| Application: |
Cooling
Water Treatment |
| Brief
Description: |
Scale
& Corrosion Inhibitor |
| Format: |
Bottle
(5.0kg) - Solid |
| Description |
SCT6011 is a cooling water treatment scale and
corrosion inhibitor developed for “corrosive”
water conditions. Based on stabilised phosphate
it uses the very latest anti-fouling and corrosion
inhibition technologies.
SCT6011 is available in fully recyclable plastic
bottles each containing 5kg of concentrated solid
chemical.
SCT6011 contains SHMP poly-phos, PBTC phosphonate,
DSP, ALCO 540 high performance polymer and triazole.
SCT6011 does not contain molybdate or heavy metals
such as zinc.
Product Application / Feedrate
At a dosage of 50 ppm in the re-circulating water,
this product formulation contains the following:
SHMP poly-phos - 7 ppm
PBTC phosphonate - 4 ppm
DSP - 4 ppm
ALCO 540 (active) - 11 ppm
T-T - 3.5 ppm
This formulation is designed for corrosive water
conditions which may or may not be scaling in nature.
For more aggressive corrosive conditions, i.e. <
0 LSI, feed rates above 50 ppm may be required.
Recommended Dosage Rates
The initial recommended dosage rate for SCT6011
is 50 ppm in the re-circulating water. However,
in practice, rates should be set to suit individual
water conditions.
Testing & Control
Phosphonate or polymer test kits suitable for monitoring
and controlling the use of SCT6011 are available
from SCT. Maintain ortho-PO4 at 8 ppm,
and active polymer at 11 ppm.
Feeding
Feed SCT6011 using an SCT DB100 board system.
Packaging, Storage and Handling
SCT6011 is packaged in cases containing 4 x 5kg
bottles.
Each case weighs 20kg.
For all safety data refer to the latest SCT MSDS.
Store this product in cool, dry area. Correctly
stored product will remain effective for between
24 to 36 months.
Additional Information
& Technical Support
For additional product information, application advice,
pricing or technical
support please contact us for further assistance.
|
