| Product
Name: |
SCT6002 |
|
| Application: |
Cooling
Water Treatment |
| Brief
Description: |
Scale
& Corrosion Inhibitor for "Stressed"
High Water Hardness Conditions |
| Format: |
Baton
(0.36kg) - Solid |
| Description |
SCT6002 is a multi-functional scale and corrosion
inhibitor cooling water treatment product developed
for “stressed”, high water hardness
conditions. It uses the very latest anti-scaling,
anti-fouling and corrosion inhibition technologies.
Its scale dispersant and corrosion inhibitors work
with conventional chemistry to provide system protection
at low product dosage rates.
SCT6002 comprises a small solid chemical baton
(0.36kg) wrapped in a water soluble bag. It is designed
to treat open cooling tower water systems during
system start-up, and helps to achieve a suitable
inhibitor concentration during this stage.
SCT6002 is also a good “catch up” solution
for cooling systems that have lost water or where
the inhibitor feed has been absent for some time.
It is also good for use in small cooling systems
where metering of the inhibitor into the system
is not practical.
SCT6002 contains PBTC phosphonate, HEDP phosphonate,
polymaleic acid, Ter-polymer, HPA and triazole.
Product Application / Feedrate
SCT6002 can be used in cooling tower water systems
using the following dosage rates. The application
rates provided below are based on set water stability
indices, however in practice, dosage rates should
be set to suit individual water conditions.
Recommended Dosage
Water
Quality Range |
Dosage* |
Test
Range |
Ryzner Stability
Index |
Calcium |
Alkalinity |
Chemical level in recirculating
water |
Organo-
phosphonate |
6.0 – 4.0 |
200 - 500 ppm |
200 – 500 ppm |
15 – 25 ppm |
3 – 5 ppm |
4.0 - 3.0 |
500 - 800 ppm |
500 - 600 ppm |
25 –40 ppm |
4 – 6 ppm |
< 3.0 |
800+ ppm |
600+ ppm |
40+ ppm |
6 – 8 ppm |
* Each baton of SCT6002 yields 25 ppm of product
when added to 14.4m3 of system volume/water.
Testing & Control
Organo-phosphonate specific test kits suitable
for monitoring and controlling the use of SCT6002
are available from SCT.
Feeding*
When dosed into a cooling system, operators should
attempt to find a high flow area in the sump of
the cooling tower or inside an accessible make-up
tank. Please note that product dissolution rates
will vary depending upon water composition, temperature
and flow rate.
Packaging, Storage and Handling
SCT6002 is packaged in cases containing 30 x 0.36kg
water-soluble bags, each bag being enclosed in a
sealed cardboard tube.
Each case weighs 10.9kg.
For all safety data refer to the latest SCT MSDS.
Store this product in cool, dry area. Correctly
stored product will remain effective for between
24 to 36 months.
Additional Information
& Technical Support
For additional product information, application advice,
pricing or technical
support please contact us for further assistance.
|
