| Product
Name: |
SCT6006 |
|
| Application: |
Cooling
Water Treatment |
| Brief
Description: |
Multi-Functional
Scale & Corrosion Inhibitor with Anti-Foulant |
| Format: |
Baton
(0.36kg) - Solid |
| Description |
SCT6006 is a specialist multi-functional cooling
water treatment product in a concentrated solid
baton form which combines the very latest anti-scaling,
anti-fouling and corrosion inhibition technologies.
SCT6006 comprises a small solid baton (0.36kg)
wrapped in a water soluble bag. It is designed to
treat open cooling tower water systems during system
start-up, and helps to achieve a suitable inhibitor
concentration during this stage.
SCT6006 is also a good “catch up” solution
for cooling systems that have lost water or where
the inhibitor feed has been absent for some time.
It is also good for use in small cooling systems
where metering of the inhibitor into the system
is not practical.
SCT6006 is a highly effective cooling water treatment
product developed for “stressed” conditions.
It uses the very latest anti-scaling, anti-fouling
and corrosion inhibition technologies. Its scale
dispersant and corrosion inhibitors work with conventional
chemistry to provide system protection at low product
dosage rates.
SCT6006 contains PBTC phosphonate, HEDP phosphonate,
Versaflex One, Ter-polymer, HPA and triazole.
Product Application / Feedrate
SCT6006 can be used in cooling tower water systems
using the following dosage rates. The application
rates provided below are based on set water stability
indices, however in practice, dosage rates should
be set to suit individual water conditions.
Recommended Dosage Rates
Water
Quality Range |
Dosage |
Test
Range |
Ryzner Stability
Index |
Calcium |
Alkalinity |
Chemical level in recirculating
water |
Organo-
phosphonate |
6.0 - 4.0 |
200 - 500ppm |
200 - 500ppm |
15 - 25ppm |
3 - 5ppm |
4.0 - 3.0 |
500 - 800ppm |
500 - 600ppm |
25 - 40ppm |
4 - 6ppm |
< 3.0 |
800+ppm |
600+ppm |
40+ppm |
6 - 8ppm |
* Each baton of SCT6006 yields 25 ppm of product
when added to 14.4m3 of system volume/water.
Testing & Control
Organo-phosphonate specific test kits suitable
for monitoring and controlling the use of SCT6006
are available from SCT.
Feeding*
When dosed into a cooling system, operators should
attempt to find a high flow area in the sump of
the cooling tower or inside an accessible make-up
tank. Please note that product dissolution rates
will vary depending upon water composition, temperature
and flow rate.
Packaging, Storage and Handling
SCT6006 is packaged in cases containing 30 x 0.36kg
water-soluble bags, each bag being enclosed in a
sealed cardboard tube.
Each case weighs 10.9kg.
For all safety data refer to the latest SCT MSDS.
Store this product in cool, dry area. Correctly
stored product will remain effective for between
24 to 36 months.
Additional Information
& Technical Support
For additional product information, application advice,
pricing or technical
support please contact us for further assistance.
|
