Scale Inhibitor & Alkalinity Builder for Softened or Hard Water home | solid chemicals | contact
product selector >>
Why use solids?
Our innovative solid chemicals deliver a range of important benefits ... why use solids >>

Improved safety
Improve safety, reduce accidents, coroprate risk and down-time .. improve safety >>

Eco-friendly
Improve your environmental performance ... eco-friendly >>

Scale Inhibitor & Alkalinity Builder for Softened or Hard Water

Product Name:

SCT6038
Application: Boiler Water Treatment
Brief Description: Scale Inhibitor & Alkalinity Builder for Softened or Hard Water
Format: Bottle (5.5kg) - Solid
Description

SCT6038 is a solid boiler water treatment product incorporating scale inhibitors and an alkalinity builder. This product is based on low-level phosphate-polymer, chelant and an alkalinity builder and is suitable for use in boiler systems under both softened and hard water make-up applications. For hard water applications, less than 20 ppm total hardness in the feed water. SCT6038 includes low levels of chelant and polymer; when used over time these components combine to aid on-line system cleaning.

All components of SCT6038 conform to US FDA Title 21, Section 173 Boiler Water Additives.

SCT6038 is available in fully recyclable plastic bottles each containing 5.5kg of concentrated solid chemical.

Product Application / Feedrate

1kg of SCT6038, dosed at a rate of 40 ppm will treat approximately 55,000lbs of boiler blowdown.

One case of SCT6038 (21.8kg) is equivalent to 108kg of a conventional liquid product. Comparative values will vary, dependent upon concentration.

Testing & Control

Testing
In Boiler Water
Total phosphate (PO4)*
6 – 12 ppm
p-Alkalinity
250 – 600 ppm
Conductivity
See manufacturers guidelines

* - Total phosphate is used for ease of testing. If the make-up water contains PO4, adjust or lower the control limits to compensate for this interference.

Test kits suitable for monitoring and controlling the use of SCT 6037 are available from SCT.

Feeding

Feed SCT6038 using an SCTDB100 board system.

Packaging, Storage and Handling

SCT6038 is packaged in cases containing 4 x 5.5kg bottles.

Each case weighs 21.8kg.

For all safety data refer to the latest SCTMSDS.

Store this product in cool, dry area. Correctly stored product will remain effective for between 24 to 36 months.

Additional Information & Technical Support

For additional product information, application advice, pricing or technical support please contact us for further assistance.

 

 

 
 
 
>>
Boilers
 
>>
Cooling
 
>>
Biocides
 
>>
Closed Loops
 
>>
Equipment
 
>>
Test Kits
 

Solid Chemical Technologies
Statham House
Old Trafford
Manchester M32 0FP
United Kingdom

Tel: +44(0) 161 877 2334
Fax: +44(0) 870 135 6389
E: info@solidchemicals.com

 

 

home | solid chemicals | about | faq | partnerships | contact | careers | product selector
boilers | cooling | biocides | closed loops | equipment | test kits | technical support | sales
environmental | media | privacy | site map
 
©2010 Solid Chemicals Limited - all rights reserved