Multi-Purpose Boiler Treatment for Hard & Soft Water Systems home | chemicals | contact | movie
product selector >>
Why use solids?
Our innovative solid chemicals deliver a range of important benefits ... why use solids >>

Improved safety
Improve safety, reduce accidents, coroprate risk and down-time .. improve safety >>

Eco-friendly
Improve your environmental performance ... eco-friendly >>

Multi-Purpose Treatment for Hard & Softened Water Systems

Product Name:

SCT6052
Application: Boiler Water Treatment
Brief Description: Multi-Purpose Treatment for Hard & Softened Water Systems
Format: Baton (0.36kg) - Solid
Description

SCT6052 is a solid multi-purpose boiler water treatment product incorporating corrosion inhibitors, scale inhibitors and alkalinity builders. This product is suitable for use in boiler systems under both softened and hard water make-up applications. For hard water applications, less than 20 ppm total hardness in the feed water.

All components of SCT6052 conform to US FDA Title 21, Section 173 Boiler Water Additives. SCT6052 is also an NSF approved product.

SCT6052 comprises a small (0.36kg) solid chemical baton wrapped in a water soluble bag.

Product Application / Feedrate

1 baton of SCT6052 (0.36kg), dosed at a rate of 60 ppm will treat approximately 13,200lbs of boiler blowdown.

One case of SCT6052 (10.9kg) is equivalent to 57kg of a conventional liquid product. Comparative values will vary, dependent upon concentration.

Testing & Control

Testing
In Boiler Water
Total Phosphate (PO4)*
8 – 12 ppm
Sulphite
20 – 30 ppm
p-Alkalinity
250 – 600 ppm
Conductivity
See manufacturers guidelines

* - Total phosphate is used for ease of testing. If the make-up water contains PO4, adjust or lower the control limits to compensate for this interference.

Test kits suitable for monitoring and controlling the use of SCT6052 are available from SCT.

Feeding

Add batons of SCT6052 directly in to the system ensuring the contents are fully dissolved. Prior to use, conduct system water tests to determine the correct dosage.

Packaging, Storage and Handling

SCT6052 is packaged in cases containing 30 x 0.36kg water-soluble batons, each baton being enclosed in a sealed cardboard tube.

Each case weighs 10.9kg.

For all safety data refer to the latest SCT MSDS.

Store this product in cool, dry area. Correctly stored product will remain effective for between 24 to 36 months.

Additional Information & Technical Support

For additional product information, application advice, pricing or technical support please contact us for further assistance.

 

 

 

 
 
 
>>
Boilers
 
>>
Cooling
 
>>
Biocides
 
>>
Closed Loops
 
>>
Equipment
 
>>
Test Kits
 
 
Distributor opportunities View Solid Chemicals movie

Solid Chemical Technologies
Statham House
Old Trafford
Manchester M32 0FP
United Kingdom

Tel: +44(0) 161 877 2334
Fax: +44(0) 870 135 6389
E: info@solidchemicals.com

 

 

home | solid chemicals | about | faq | partnerships | contact | careers | product selector
boilers | cooling | biocides | closed loops | equipment | test kits | technical support | movie
sales | environmental | media | privacy | site map
 
©2012 Solid Chemicals Limited - all rights reserved