Multi-Purpose Boiler Treatment for Hard & Soft Water Systems home | chemicals | contact | movie
product selector >>
Why use solids?
Our innovative solid chemicals deliver a range of important benefits ... why use solids >>

Improved safety
Improve safety, reduce accidents, coroprate risk and down-time .. improve safety >>

Eco-friendly
Improve your environmental performance ... eco-friendly >>

Multi-Purpose Boiler Treatment for Hard & Soft Water Systems

Product Name:

SCT6057
Application: Boiler Water Treatment
Brief Description: Multi-Purpose Boiler Treatment for Hard and Soft Water Systems
Format: Bottle (5.5kg) - Solid
Description

SCT6057 is a solid multi-purpose boiler water treatment product incorporating corrosion inhibitors, scale inhibitors, a chelating agent, alkalinity builders; and a condensate corrosion inhibitor. This product is suitable for use in boiler systems under both softened and hard water make-up applications. For hard water applications, less than 20 ppm total hardness in the feed water.

All components of SCT6057 conform to US FDA Title 21, Section 173 Boiler Water Additives.

SCT6057 is available in fully recyclable plastic bottles each containing 5.5kg of concentrated solid chemical.

Product Application / Feedrate

1kg of SCT6057, dosed at a rate of 80 ppm will treat approximately 27,500lbs of boiler blowdown.

One case of SCT6057 (21.8kg) is equivalent to 114kg of a conventional liquid product. Comparative values will vary, dependent upon concentration.

Do not exceed 6 ppm chelant in the boiler.

Testing & Control

Testing
In Boiler Water
Totap Phosphate (PO4)
8 - 12 ppm
Sulphite
20 – 30 ppm
p-Alkalinity
250 – 600 ppm
Conductivity
See manufacturers guidelines

Testing
In Condensate Return
pH
7.0 - 8.5
Iron
< 1 ppm

* - Total phosphate is used for ease of testing. If the make-up water contains PO4, adjust or lower the control limits to compensate for this interference.

Test kits suitable for monitoring and controlling the use of SCT6057 are available from SCT.

Feeding

Feed SCT6057 using an SCT DB100 board system.

Packaging, Storage and Handling

SCT6057 is packaged in cases containing 4 x 5.5kg bottles.

Each case weighs 21.8kg.

For all safety data refer to the latest SCT MSDS.

Store this product in cool, dry area. Correctly stored product will remain effective for between 24 to 36 months.

Additional Information & Technical Support

For additional product information, application advice, pricing or technical support please contact us for further assistance.

 


 

 

 

 
 
 
>>
Boilers
 
>>
Cooling
 
>>
Biocides
 
>>
Closed Loops
 
>>
Equipment
 
>>
Test Kits
 
 
Distributor opportunities View Solid Chemicals movie

Solid Chemical Technologies
Statham House
Old Trafford
Manchester M32 0FP
United Kingdom

Tel: +44(0) 161 877 2334
Fax: +44(0) 870 135 6389
E: info@solidchemicals.com

 

 

home | solid chemicals | about | faq | partnerships | contact | careers | product selector
boilers | cooling | biocides | closed loops | equipment | test kits | technical support | movie
sales | environmental | media | privacy | site map
 
©2012 Solid Chemicals Limited - all rights reserved