Multi-Purpose Treatment for Hard & Softened Water Systems

Product Name:	SCT6050
Application:	Boiler Water Treatment
Brief Description:	Multi-Purpose Treatment for Hard & Softened Water Systems
Format:	Bottle (5.5kg) - Solid
Description

SCT6050 is a solid multi-purpose boiler water treatment product incorporating corrosion inhibitors, scale control agents, alkalinity builders, and a condensate corrosion inhibitor. This product is suitable for use in boiler systems under both softened and hard water make-up applications. For hard water applications, less than 20 ppm total hardness in the feed water.

All components of SCT6050 conform to US FDA Title 21, Section 173 Boiler Water Additives. SCT6050 is also an NSF approved product.

SCT6050 is available in fully recyclable plastic bottles each containing 5.5kg of concentrated solid chemical.

Product Application / Feedrate

1kg of SCT6050, dosed at a rate of 80 ppm will treat approximately 27,500lbs of boiler blowdown.

One case of SCT6050 (21.8kg) is equivalent to 114kg of a conventional liquid product. Comparative values will vary, dependent upon concentration.

Testing & Control

Testing	In Condensate Return
pH	7.0 – 8.5
Iron	< 1 ppm

* - Total phosphate is used for ease of testing. If the make-up water contains PO₄, adjust or lower the control limits to compensate for this interference.

Test kits suitable for monitoring and controlling the use of SCT6050 are available from SCT.

Feeding

Feed SCT6050 using an SCT DB100 board system.

Packaging, Storage and Handling

SCT6050 is packaged in cases containing 4 x 5.5kg bottles.

Each case weighs 21.8kg.

For all safety data refer to the latest SCT MSDS.

Store this product in cool, dry area. Correctly stored product will remain effective for between 24 to 36 months.

Additional Information & Technical Support

For additional product information, application advice, pricing or technical support please contact us for further assistance.