| Product
Name: |
SCT6019 |
|
| Application: |
Biocide
for Cooling Water Treatment |
| Brief
Description: |
EPA
Registered Non-Oxidising Biocide with DBNPA |
| Format: |
Bottle
(2.3kg) - Solid |
| Description |
SCT6019 is a US EPA registered solid non-oxidising
biocide developed for cooling water treatment applications.
SCT6019 is highly effective against a wide spectrum
of common waterborne organisms, acting to control
microbiological fouling and inhibiting further growth.
SCT6019 is available in fully recyclable plastic
bottles each containing 2.3kg of concentrated solid
chemical.
SCT6019 contains 2, 2-Dibromo-3-NitriloPropionamide
(DBNPA) 98%.
Product Degradation & Stability
SCT6019 quickly degrades at increased pH and temperature
levels to leave carbon dioxide, ammonia and bromide
ions. It is considered ideal for systems operating
under strict environmental and discharge regulatory
requirements.
Unlike most cooling water biocides SCT6019 continues
to perform well even at higher pH levels. It is
engineered to deliver fast and effective microbial
control well before any significant product degradation
occurs. SCT6019 is ideal where both fast antimicrobial
activity and rapid degradation of the microbiocide
is required. This combination improves control whilst
minimising environmental impact.
Dosage Rate
For industrial re-circulating cooling water systems
dosage rates for SCT6019 will be dependent on the
conditions of the system prior to treatment. Systems
that are heavily contaminated should be cleaned
prior to product use.
Apply SCT6019 to the cleaned system or when growth
is first identified in accordance with the following:
Initial Dosage
Dose 1kg of SCT6019 per 792m3 of water
in the system. This dosage regime may be as a continuous
treatment applied once, twice or three times weekly,
or as required to control the growth of slime forming
organisms.
Subsequent Dose:
When microbial activity is identified, add 1 kg
of SCT6019 per 792m3 of bleed water as
a continuous treatment daily, or every 3 days; or
as required to maintain control.
Testing & Control
DBNPA test kits suitable for monitoring and controlling
the use of SCT6019 are available from SCT.
Feeding
Feed SCT6019 using an SCT DB100 board system.
Packaging, Storage and Handling
SCT6019 is packaged in cases containing 4 x 2.3kg
bottles.
Each case weighs 9.1kg.
For all safety data refer to the latest SCT MSDS.
Store this product in cool, dry area. Correctly
stored product will remain effective for between
24 to 36 months.
Additional Information
& Technical Support
For additional product information, application advice,
pricing or technical
support please contact us for further assistance.
|
